MexBIOS Development Studio: Software loading

Connection initiation

To initiate a connection you need to click button with icon  in Upper panel. If the connection attempt was successful, the icon turns into , and an indicator of version of the device software core appears.

Fig. 1. Indicator of the core version at connecting

Connection parameter settings

If the connection attempt was unsuccessful or a connection error appears, you need to modify the connection settings. Button with icon  opens the connection settings dialog box.

Fig. 2. Connection parameter settings dialog box

 

In Port choose the COM-port that is identified, when a device is connected to the computer. 

IMPORTANT: The port number should not exceed 10 (COM10).

 

Software loading

Software can be loaded into RAM of the device, but the software will stop operating after the device reset. If the software is loaded into nonvolatile memory (NVRAM), the software continues operating even after the device reset.

Fig. 3. Selecting RAM/NVRAM

 

 - Starts loading the developed software into RAM of the device with active connection. 

 - Starts loading the developed software into NVRAM of the device with active connection.